tuxedo多機方式配置有兩個方面
1.啟動tlisten
tlisten在tuxedo啟動時扮演控制者的角色,在非master機上由tlisten啟動bbl和應用服務器,tlisten的啟動方法為
tlisten?? -l //host:ipport
注意這里的ipport必須和ubb文件中NETWORK域NLSADDR一致
tlisten必須在所有的機器上啟動,啟動后才能運行tmboot.建議操作系統啟動時就運行tlisten.
2.
ubb文件配置
對于多機模式一般就是指單一domain管理的多臺機器,所有機器上僅需要一個ubb文件,以下是ubb文件的模板
*RESOURCES
IPCKEY????? 80952
MAXACCESSERS??? 40
MAXSERVERS? 35
MAXSERVICES75
MASTER????? SITE1,SITE2
OPTIONSLAN,MIGRATE
MODEL?????? MP
*MACHINES
<SITE1's uname> LMID=SITE1
??????? TUXDIR="<TUXDIR1>"
??????? APPDIR="<APPDIR1>"
??????? TUXCONFIG="<APPDIR1>/tuxconfig"
??????? TYPE="<machine type1>"
??????? ULOGPFX="<APPDIR1>/ULOG"
<SITE2's uname>LMID=SITE2
??????? TUXDIR="<TUXDIR2>"
??????? APPDIR="<APPDIR2>"
??????? TLOGDEVICE="<APPDIR2>/TLOG"
??????? TLOGNAME=TLOG
??????? TUXCONFIG="<APPDIR2>/tuxconfig"
??????? TYPE="<machine type2>"
??????? ULOGPFX="<APPDIR2>/ULOG"
#
*GROUPS
*NETWORK
SITE1?? NADDR="<network address of SITE1>"
??? BRIDGE="<device of provider1>"
??? NLSADDR="<network listener address of SITE1>"
SITE2?? NADDR="<network address of SITE2>"
??? BRIDGE="<device of provider2>"
??? NLSADDR="<network listener address of SITE2>"
*SERVERS
DEFAULT: RESTART=Y MAXGEN=5 REPLYQ=Y CLOPT="-A"
#
*SERVICES
3.
??
管理
只能在
master
機上運行
tmadmin
進行管理。要獲得統計信息在
tmadmin
中應運行
default –m
命令。
例如：
tmadmin
>default –m SITE1
>printservice
?
Sample:
#ident?????? "@(#) samples/atmi/simpapp/ubbmp??????? $Revision: 1.2.8.1 $"
?
*RESOURCES
IPCKEY???????????? 87654
?
MASTER??????????? site1,site2
MAXACCESSERS???? 40
MAXSERVERS20
MAXSERVICES???????? 40
UID?????????? 0
GID?????????? 0
MODEL???????????? MP
OPTIONS????????? LAN,MIGRATE
?
*MACHINES
CHRIS??????????????? LMID=site1
?????????????????? APPDIR="d:\tuxedo\samples\atmi\simpapp"
?????????????????? TUXCONFIG="d:\tuxedo\samples\atmi\simpapp\tuxconfig"
#??????????????? TYPE="<Replace with the proper machine type for site1>"
?????????????????? TUXDIR="d:\tuxedo"
?
chrislinux????????? LMID=site2
?????????????????? APPDIR="/home/tuxedo/samples/atmi/simpapp"
?????????????????? TUXCONFIG="/home/tuxedo/samples/atmi/simpapp/tuxconfig"
#??????????????? TYPE="<Replace with the proper machine type for site2>"
?????????????????? TUXDIR="/home/tuxedo"
?????????????????? UID=503
?????????????????? GID=503
?
*GROUPS
GROUP1
???????? LMID=site1????? GRPNO=1??????? OPENINFO=NONE
GROUP2
???????? LMID=site2????? GRPNO=2??????? OPENINFO=NONE
?
*NETWORK
site1NADDR="http://10.10.10.10:6033"
???????? NLSADDR="http://10.10.10.10:6034"
#?????? BRIDGE="<Replace with the network device or omit if there is none>"
?
site2NADDR="http://10.10.10.11:6033"
???????? NLSADDR="http://10.10.10.11:6034"
#?????? BRIDGE="<Replace with the network device or omit if there is none>"
?
*SERVERS
DEFAULT:
?????????????????? CLOPT="-A"
?
simpserv?? SRVGRP=GROUP1 SRVID=3
?
*SERVICES
TOUPPER