在上篇文章中，遇到朋友提到上下文加載器的問題。一直有很多疑惑。今天在CSDN上正巧看到一篇關于上下文加載器的譯文（這方面網上相關的資料真的太少了）。感覺有所啟發。于是搜了搜原文。連同譯文一塊作為收藏。

譯文來自：http://blog.sina.com.cn/u/4b6047bc0100096v

對于類加載器，普通Java應用開發人員不需要了解太多。但對于系統開發人員，正確理解Java的類加載器模型是開發Java系統軟件的關鍵。很久以來，我一直對ClassLoader許多問題感到很模糊，自己也在一直探討ClassLoader的機制，但苦于Java這方面的文檔太少，許多東西都是自己學習JDK源碼和看開源系統應用項目的代碼總結出來，很不清晰。前不久在幫朋友做那個企業應用平臺時，對這方面的知識深入研究和學習了一下，遇到的最好的文檔就是這篇文章了。在這兒翻譯出來，與希望寫系統代碼的朋友分享。

原文太長，分篇譯出。喜歡看原文的朋友不妨直接閱讀原文。

問題：何時使用Thread.getContextClassLoader()?

這是一個很常見的問題，但答案卻很難回答。這個問題通常在需要動態加載類和資源的系統編程時會遇到。總的說來動態加載資源時，往往需要從三種類加載器里選擇：系統或說程序的類加載器、當前類加載器、以及當前線程的上下文類加載器。在程序中應該使用何種類加載器呢？

系統類加載器通常不會使用。此類加載器處理啟動應用程序時classpath指定的類，可以通過ClassLoader.getSystemClassLoader()來獲得。所有的ClassLoader.getSystemXXX()接口也是通過這個類加載器加載的。一般不要顯式調用這些方法，應該讓其他類加載器代理到系統類加載器上。由于系統類加載器是JVM最后創建的類加載器，這樣代碼只會適應于簡單命令行啟動的程序。一旦代碼移植到EJB、Web應用或者Java Web Start應用程序中，程序肯定不能正確執行。

因此一般只有兩種選擇，當前類加載器和線程上下文類加載器。當前類加載器是指當前方法所在類的加載器。這個類加載器是運行時類解析使用的加載器，Class.forName(String)和Class.getResource(String)也使用該類加載器。代碼中X.class的寫法使用的類加載器也是這個類加載器。

線程上下文類加載器在Java 2(J2SE)時引入。每個線程都有一個關聯的上下文類加載器。如果你使用new Thread()方式生成新的線程，新線程將繼承其父線程的上下文類加載器。如果程序對線程上下文類加載器沒有任何改動的話，程序中所有的線程將都使用系統類加載器作為上下文類加載器。Web應用和Java企業級應用中，應用服務器經常要使用復雜的類加載器結構來實現JNDI（Java命名和目錄接口)、線程池、組件熱部署等功能，因此理解這一點尤其重要。

為什么要引入線程的上下文類加載器？將它引入J2SE并不是純粹的噱頭，由于Sun沒有提供充分的文檔解釋說明這一點，這使許多開發者很糊涂。實際上，上下文類加載器為同樣在J2SE中引入的類加載代理機制提供了后門。通常JVM中的類加載器是按照層次結構組織的，目的是每個類加載器（除了啟動整個JVM的原初類加載器）都有一個父類加載器。當類加載請求到來時，類加載器通常首先將請求代理給父類加載器。只有當父類加載器失敗后，它才試圖按照自己的算法查找并定義當前類。

有時這種模式并不能總是奏效。這通常發生在JVM核心代碼必須動態加載由應用程序動態提供的資源時。拿JNDI為例，它的核心是由JRE核心類(rt.jar)實現的。但這些核心JNDI類必須能加載由第三方廠商提供的JNDI實現。這種情況下調用父類加載器（原初類加載器）來加載只有其子類加載器可見的類，這種代理機制就會失效。解決辦法就是讓核心JNDI類使用線程上下文類加載器，從而有效的打通類加載器層次結構，逆著代理機制的方向使用類加載器。

順便提一下，XML解析API(JAXP)也是使用此種機制。當JAXP還是J2SE擴展時，XML解析器使用當前累加載器方法來加載解析器實現。但當JAXP成為J2SE核心代碼后，類加載機制就換成了使用線程上下文加載器，這和JNDI的原因相似。

好了，現在我們明白了問題的關鍵：這兩種選擇不可能適應所有情況。一些人認為線程上下文類加載器應成為新的標準。但這在不同JVM線程共享數據來溝通時，就會使類加載器的結構亂七八糟。除非所有線程都使用同一個上下文類加載器。而且，使用當前類加載器已成為缺省規則，它們廣泛應用在類聲明、Class.forName等情景中。即使你想盡可能只使用上下文類加載器，總是有這樣那樣的代碼不是你所能控制的。這些代碼都使用代理到當前類加載器的模式。混雜使用代理模式是很危險的。

更為糟糕的是，某些應用服務器將當前類加載器和上下文類加器分別設置成不同的ClassLoader實例。雖然它們擁有相同的類路徑，但是它們之間并不存在父子代理關系。想想這為什么可怕：記住加載并定義某個類的類加載器是虛擬機內部標識該類的組成部分，如果當前類加載器加載類X并接著執行它，如JNDI查找類型為Y的數據，上下文類加載器能夠加載并定義Y，這個Y的定義和當前類加載器加載的相同名稱的類就不是同一個，使用隱式類型轉換就會造成異常。

這種混亂的狀況還將在Java中存在很長時間。在J2SE中還包括以下的功能使用不同的類加載器：

* JNDI使用線程上下文類加載器

* Class.getResource()和Class.forName()使用當前類加載器

* JAXP使用上下文類加載器

* java.util.ResourceBundle使用調用者的當前類加載器

* URL協議處理器使用java.protocol.handler.pkgs系統屬性并只使用系統類加載器。

* Java序列化API缺省使用調用者當前的類加載器

這些類加載器非常混亂，沒有在J2SE文檔中給以清晰明確的說明。

該如何選擇類加載器？
    如若代碼是限于某些特定框架，這些框架有著特定加載規則，則不要做任何改動，讓框架開發者來保證其工作（比如應用服務器提供商，盡管他們并不能總是做對）。如在Web應用和EJB中，要使用Class.gerResource來加載資源。在其他情況下，需要考慮使用下面的代碼，這是作者本人在工作中發現的經驗：

public abstract class ClassLoaderResolver
{
    /**
     * This method selects the best classloader instance to be used for
     * class/resource loading by whoever calls this method. The decision
     * typically involves choosing between the caller's current, thread context,
     * system, and other classloaders in the JVM and is made by the {@link IClassLoadStrategy}
     * instance established by the last call to {@link #setStrategy}.
     *
     * @return classloader to be used by the caller ['null' indicates the
     * primordial loader]  
     */
    public static synchronized ClassLoader getClassLoader ()
    {
        final Class caller = getCallerClass (0);
        final ClassLoadContext ctx = new ClassLoadContext (caller);
       
        return s_strategy.getClassLoader (ctx);
    }
    public static synchronized IClassLoadStrategy getStrategy ()
    {
        return s_strategy;
    }
    public static synchronized IClassLoadStrategy setStrategy (final IClassLoadStrategy strategy)
    {
        final IClassLoadStrategy old = s_strategy;
        s_strategy = strategy;
       
        return old;
    }
       
    /**
     * A helper class to get the call context. It subclasses SecurityManager
     * to make getClassContext() accessible. An instance of CallerResolver
     * only needs to be created, not installed as an actual security
     * manager.
     */
    private static final class CallerResolver extends SecurityManager
    {
        protected Class [] getClassContext ()
        {
            return super.getClassContext ();
        }
       
    } // End of nested class
   
   
    /*
     * Indexes into the current method call context with a given
     * offset.
     */
    private static Class getCallerClass (final int callerOffset)
    {       
        return CALLER_RESOLVER.getClassContext () [CALL_CONTEXT_OFFSET +
            callerOffset];
    }
   
    private static IClassLoadStrategy s_strategy; // initialized in <clinit>
   
    private static final int CALL_CONTEXT_OFFSET = 3; // may need to change if this class is redesigned
    private static final CallerResolver CALLER_RESOLVER; // set in <clinit>
   
    static
    {
        try
        {
            // This can fail if the current SecurityManager does not allow
            // RuntimePermission ("createSecurityManager"):
           
            CALLER_RESOLVER = new CallerResolver ();
        }
        catch (SecurityException se)
        {
            throw new RuntimeException ("ClassLoaderResolver: could not create CallerResolver: " + se);
        }
       
        s_strategy = new DefaultClassLoadStrategy ();
    }
} // End of class.

    可通過調用ClassLoaderResolver.getClassLoader()方法來獲取類加載器對象，并使用其ClassLoader的接口來加載類和資源。此外還可使用下面的ResourceLoader接口來取代ClassLoader接口：

public abstract class ResourceLoader
{
    /**
     * @see java.lang.ClassLoader#loadClass(java.lang.String)
     */
    public static Class loadClass (final String name)
        throws ClassNotFoundException
    {
        final ClassLoader loader = ClassLoaderResolver.getClassLoader (1);
       
        return Class.forName (name, false, loader);
    }
    /**
     * @see java.lang.ClassLoader#getResource(java.lang.String)
     */   
    public static URL getResource (final String name)
    {
        final ClassLoader loader = ClassLoaderResolver.getClassLoader (1);
       
        if (loader != null)
            return loader.getResource (name);
        else
            return ClassLoader.getSystemResource (name);
    }
    ... more methods ...
} // End of class
    決定應該使用何種類加載器的接口是IClassLoaderStrategy：

public interface IClassLoadStrategy
{
    ClassLoader getClassLoader (ClassLoadContext ctx);
} // End of interface
    為了幫助IClassLoadStrategy做決定，給它傳遞了個ClassLoadContext對象作為參數：

public class ClassLoadContext
{
    public final Class getCallerClass ()
    {
        return m_caller;
    }
   
    ClassLoadContext (final Class caller)
    {
        m_caller = caller;
    }
   
    private final Class m_caller;
} // End of class
    ClassLoadContext.getCallerClass()返回的類在ClassLoaderResolver或ResourceLoader使用，這樣做的目的是讓其能找到調用類的類加載器（上下文加載器總是能通過Thread.currentThread().getContextClassLoader()來獲得）。注意

調用類是靜態獲得的，因此這個接口不需現有業務方法增加額外的Class參數，而且也適合于靜態方法和類初始化代碼。具體使用時，可以往這個上下文對象中添加具體部署環境中所需的其他屬性。
    上面代碼看起來很像Strategy設計模式，其思想是將“總是使用上下文類加載器”或者“總是使用當前類加載器”的決策同具體實現邏輯分離開。往往設計之初是很難預測何種類加載策略是合適的，該設計能夠讓你可以后來修改類加載策略。

這兒有一個缺省實現，應該可以適應大部分工作場景：

public class DefaultClassLoadStrategy implements IClassLoadStrategy
{
    public ClassLoader getClassLoader (final ClassLoadContext ctx)
    {
        final ClassLoader callerLoader = ctx.getCallerClass ().getClassLoader ();
        final ClassLoader contextLoader = Thread.currentThread ().getContextClassLoader ();
       
        ClassLoader result;
       
        // If 'callerLoader' and 'contextLoader' are in a parent-child
        // relationship, always choose the child:
       
        if (isChild (contextLoader, callerLoader))
            result = callerLoader;
        else if (isChild (callerLoader, contextLoader))
            result = contextLoader;
        else
        {
            // This else branch could be merged into the previous one,
            // but I show it here to emphasize the ambiguous case:
            result = contextLoader;
        }
       
        final ClassLoader systemLoader = ClassLoader.getSystemClassLoader ();
       
        // Precaution for when deployed as a bootstrap or extension class:
        if (isChild (result, systemLoader))
            result = systemLoader;
       
        return result;
    }
   
    ... more methods ...
} // End of class

    上面代碼的邏輯很簡單：如調用類的當前類加載器和上下文類加載器是父子關系，則總是選擇子類加載器。對子類加載器可見的資源通常是對父類可見資源的超集，因此如果每個開發者都遵循J2SE的代理規則，這樣做大多數情況下是合適的。
    當前類加載器和上下文類加載器是兄弟關系時，決定使用哪一個是比較困難的。理想情況下，Java運行時不應產生這種模糊。但一旦發生，上面代碼選擇上下文類加載器。這是作者本人的實際經驗，絕大多數情況下應該能正常工作。你可以修改這部分代碼來適應具體需要。一般來說，上下文類加載器要比當前類加載器更適合于框架編程，而當前類加載器則更適合于業務邏輯編程。
    最后需要檢查一下，以便保證所選類加載器不是系統類加載器的父親，在開發標準擴展類庫時這通常是個好習慣。
    注意作者故意沒有檢查要加載資源或類的名稱。Java XML API成為J2SE核心的歷程應該能讓我們清楚過濾類名并不是好想法。作者也沒有試圖檢查哪個類加載器加載首先成功，而是檢查類加載器的父子關系，這是更好更有保證的方法。

（全文完）

原文：

When should I use
Thread.getContextClassLoader()?

Although not frequently asked, this question is rather tough to correctly answer. It usually comes up during framework programming, when a good deal of dynamic class and resource loading goes on. In general, when loading a resource dynamically, you can choose from at least three classloaders: the system (also referred to as the application) classloader, the current classloader, and the current thread context classloader. The question above refers to the latter. Which classloader is the right one?

One choice I dismiss easily: the system classloader. This classloader handles -classpath and is programmatically accessible as ClassLoader.getSystemClassLoader(). All ClassLoader.getSystemXXX() API methods are also routed through this classloader. You should rarely write code that explicitly uses any of the previous methods and instead let other classloaders delegate to the system one. Otherwise, your code will only work in simple command-line applications, when the system classloader is the last classloader created in the JVM. As soon as you move your code into an Enterprise JavaBean, a Web application, or a Java Web Start application, things are guaranteed to break.

So, now we are down to two choices: current and context classloaders. By definition, a current classloader loads and defines the class to which your current method belongs. This classloader is implied when dynamic links between classes resolve at runtime, and when you use the one-argument version of Class.forName(), Class.getResource(), and similar methods. It is also used by syntactic constructs like X.class class literals (see "Get a load of That Name" for more details).

Thread context classloaders were introduced in Java 2 Platform, Standard Edition (J2SE). Every Thread has a context classloader associated with it (unless it was created by native code). It is set via the Thread.setContextClassLoader() method. If you don't invoke this method following a Thread's construction, the thread will inherit its context classloader from its parent Thread. If you don't do anything at all in the entire application, all Threads will end up with the system classloader as their context classloader. It is important to understand that nowadays this is rarely the case since Web and Java 2 Platform, Enterprise Edition (J2EE) applicatiion servers utilize sophisticated classloader hierarchies for features like Java Naming and Directory Interface (JNDI), thread pooling, component hot redeployment, and so on.

Why do thread context classloaders exist in the first place? They were introduced in J2SE without much fanfare. A certain lack of proper guidance and documentation from Sun Microsystems likely explains why many developers find them confusing.

In truth, context classloaders provide a back door around the classloading delegation scheme also introduced in J2SE. Normally, all classloaders in a JVM are organized in a hierarchy such that every classloader (except for the primordial classloader that bootstraps the entire JVM) has a single parent. When asked to load a class, every compliant classloader is expected to delegate loading to its parent first and attempt to define the class only if the parent fails.

Sometimes this orderly arrangement does not work, usually when some JVM core code must dynamically load resources provided by application developers. Take JNDI for instance: its guts are implemented by bootstrap classes in rt.jar (starting with J2SE 1.3), but these core JNDI classes may load JNDI providers implemented by independent vendors and potentially deployed in the application's -classpath. This scenario calls for a parent classloader (the primordial one in this case) to load a class visible to one of its child classloaders (the system one, for example). Normal J2SE delegation does not work, and the workaround is to make the core JNDI classes use thread context loaders, thus effectively "tunneling" through the classloader hierarchy in the direction opposite to the proper delegation.

By the way, the previous paragraph may have reminded you of something else: Java API for XML Parsing (JAXP). Yes, when JAXP was just a J2SE extension, the XML parser factories used the current classloader approach for bootstrapping parser implementations. When JAXP was made part of the J2SE 1.4 core, the classloading changed to use thread context classloaders, in complete analogy with JNDI (and confusing many programmers along the way). See what I mean by lack of guidance from Sun?

After this introduction, I have come to the crux of the matter: neither of the remaining two choices is the right one under all circumstances. Some believe that thread context classloaders should become the new standard strategy. This, however, creates a very messy classloading picture if various JVM threads communicate via shared data, unless all of them use the same context loader instance. Furthermore, delegating to the current classloader is already a legacy rule in some existing situations like class literals or explicit calls to Class.forName() (which is why, by the way, I recommend (again, see "Get a Load of  That Name" avoiding the one-argument version of this method). Even if you make an explicit effort to use only context loaders whenever you can, there will always be some code not under your control that delegates to the current loader. This uncontrolled mixing of delegation strategies sounds rather dangerous.

To make matters worse, certain application servers set context and current classloaders to different ClassLoader instances that have the same classpaths and yet are not related as a delegation parent and child. Take a second to think about why this is particularly horrendous. Remember that the classloader that loads and defines a class is part of the internal JVM's ID for that class. If the current classloader loads a class X that subsequently executes, say, a JNDI lookup for some data of type Y, the context loader could load and define Y. This Y definition will differ from the one by the same name but seen by the current loader. Enter obscure class cast and loader constraint violation exceptions.

This confusion will probably stay with Java for some time. Take any J2SE API with dynamic resource loading of any kind and try to guess which loading strategy it uses. Here is a sampling:

• JNDI uses context classloaders
• Class.getResource() and Class.forName() use the current classloader
• JAXP uses context classloaders (as of J2SE 1.4)
• java.util.ResourceBundle uses the caller's current classloader
• URL protocol handlers specified via java.protocol.handler.pkgs system property are looked up in the bootstrap and system classloaders only
• Java Serialization API uses the caller's current classloader by default

Those class and resource loading strategies must be the most poorly documented and least specified area of J2SE.

What is a Java programmer to do?

If your implementation is confined to a certain framework with articulated resource loading rules, stick to them. Hopefully, the burden of making them work will be on whoever has to implement the framework (such as an application server vendor, although they don't always get it right either). For example, always use Class.getResource() in a Web application or an Enterprise JavaBean.

In other situations, you might consider using a solution I have found useful in personal work. The following class serves as a global decision point for acquiring the best classloader to use at any given time in the application (all classes shown in this article are available with the download):
 

public abstract class ClassLoaderResolver
{
    /** *//**
     * This method selects the best classloader instance to be used for
     * class/resource loading by whoever calls this method. The decision
     * typically involves choosing between the caller's current, thread context,
     * system, and other classloaders in the JVM and is made by the {@link IClassLoadStrategy}
     * instance established by the last call to {@link #setStrategy}.
     * 
     * @return classloader to be used by the caller ['null' indicates the
     * primordial loader]   
     */
    public static synchronized ClassLoader getClassLoader ()
    {
        final Class caller = getCallerClass (0);
        final ClassLoadContext ctx = new ClassLoadContext (caller);
        
        return s_strategy.getClassLoader (ctx); 
    }
    public static synchronized IClassLoadStrategy getStrategy ()
    {
        return s_strategy;
    }
    public static synchronized IClassLoadStrategy setStrategy (final IClassLoadStrategy strategy)
    {
        final IClassLoadStrategy old = s_strategy;
        s_strategy = strategy;
        
        return old;
    }
        
    /** *//**
     * A helper class to get the call context. It subclasses SecurityManager
     * to make getClassContext() accessible. An instance of CallerResolver
     * only needs to be created, not installed as an actual security
     * manager.
     */
    private static final class CallerResolver extends SecurityManager
    {
        protected Class [] getClassContext ()
        {
            return super.getClassContext ();
        }
        
    } // End of nested class 
    
    
    /**//*
     * Indexes into the current method call context with a given
     * offset.
     */
    private static Class getCallerClass (final int callerOffset)
    {        
        return CALLER_RESOLVER.getClassContext () [CALL_CONTEXT_OFFSET +
            callerOffset];
    }
    
    private static IClassLoadStrategy s_strategy; // initialized in <clinit>
    
    private static final int CALL_CONTEXT_OFFSET = 3; // may need to change if this class is redesigned
    private static final CallerResolver CALLER_RESOLVER; // set in <clinit>
    
    static
    {
        try
        {
            // This can fail if the current SecurityManager does not allow
            // RuntimePermission ("createSecurityManager"):
            
            CALLER_RESOLVER = new CallerResolver ();
        }
        catch (SecurityException se)
        {
            throw new RuntimeException ("ClassLoaderResolver: could not create CallerResolver: " + se);
        }
        
        s_strategy = new DefaultClassLoadStrategy ();
    }
} // End of class.

You acquire a classloader reference by calling the ClassLoaderResolver.getClassLoader() static method and use the result to load classes and resources via the normal java.lang.ClassLoader API. Alternatively, you can use this ResourceLoader API as a drop-in replacement for java.lang.ClassLoader:

public abstract class ResourceLoader
{
    /** *//**
     * @see java.lang.ClassLoader#loadClass(java.lang.String)
     */
    public static Class loadClass (final String name)
        throws ClassNotFoundException
    {
        final ClassLoader loader = ClassLoaderResolver.getClassLoader (1);
        
        return Class.forName (name, false, loader);
    }
    /** *//**
     * @see java.lang.ClassLoader#getResource(java.lang.String)
     */    
    public static URL getResource (final String name)
    {
        final ClassLoader loader = ClassLoaderResolver.getClassLoader (1);
        
        if (loader != null)
            return loader.getResource (name);
        else
            return ClassLoader.getSystemResource (name);
    }
     more methods 
} // End of class

The decision of what constitutes the best classloader to use is factored out into a pluggable component implementing the IClassLoadStrategy interface:

public interface IClassLoadStrategy
{
    ClassLoader getClassLoader (ClassLoadContext ctx);
} // End of interface

To help IClassLoadStrategy make its decision, it is given a ClassLoadContext object:

public class ClassLoadContext
{
    public final Class getCallerClass ()
    {
        return m_caller;
    }
    
    ClassLoadContext (final Class caller)
    {
        m_caller = caller;
    }
    
    private final Class m_caller;
} // End of class


ClassLoadContext.getCallerClass() returns the class whose code calls into ClassLoaderResolver or ResourceLoader. This is so that the strategy implementation can figure out the caller's classloader (the context loader is always available as Thread.currentThread().getContextClassLoader()). Note that the caller is determined statically; thus, my API does not require existing business methods to be augmented with extra Class parameters and is suitable for static methods and initializers as well. You can augment this context object with other attributes that make sense in your deployment situation.

All of this should look like a familiar Strategy design pattern to you. The idea is that decisions like "always context loader" or "always current loader" get separated from the rest of your implementation logic. It is hard to know ahead of time which strategy will be the right one, and with this design, you can always change the decision later.

I have a default strategy implementation that should work correctly in 95 percent of real-life situations:

public class DefaultClassLoadStrategy implements IClassLoadStrategy
{
    public ClassLoader getClassLoader (final ClassLoadContext ctx)
    {
        final ClassLoader callerLoader = ctx.getCallerClass ().getClassLoader ();
        final ClassLoader contextLoader = Thread.currentThread ().getContextClassLoader ();
        
        ClassLoader result;
        
        // If 'callerLoader' and 'contextLoader' are in a parent-child
        // relationship, always choose the child:
        
        if (isChild (contextLoader, callerLoader))
            result = callerLoader;
        else if (isChild (callerLoader, contextLoader))
            result = contextLoader;
        else
        {
            // This else branch could be merged into the previous one,
            // but I show it here to emphasize the ambiguous case:
            result = contextLoader;
        }
        
        final ClassLoader systemLoader = ClassLoader.getSystemClassLoader ();
        
        // Precaution for when deployed as a bootstrap or extension class:
        if (isChild (result, systemLoader))
            result = systemLoader;
        
        return result;
    }
    
     more methods 
} // End of class

The logic above should be easy to follow. If the caller's current and context classloaders are in a parent-child relationship, I always choose the child. The set of resources visible to a child loader is normally a superset of classes visible to its parent, so this feels like the right decision as long as everybody plays by J2SE delegation rules.

It is when the current and the context classloaders are siblings that the right decision is impossible. Ideally, no Java runtime should ever create this ambiguity. When it happens, my code chooses the context loader: a decision based on personal experience of when things work correctly most of the time. Feel free to change that code branch to suit your taste. It is possible that the context loader is a better choice for framework components, and the current loader is better for business logic.

Finally, a simple check ensures that the selected classloader is not a parent of the system classloader. This is a good thing to do if you are developing code that might be deployed as an extension library.

Note that I intentionally do not look at the name of resources or classes that will be loaded. If nothing else, the experience with Java XML APIs becoming part of the J2SE core should have taught you that filtering by class names is a bad idea. Nor do I trial load classes to see which classloader succeeds first. Examining classloader parent-child relationships is a fundamentally better and more predictable approach.

Although Java resource loading remains an esoteric topic, J2SE relies on various load strategies more and more with every major platform upgrade. Java will be in serious trouble if this area is not given some significantly better design considerations. Whether you agree or not, I would appreciate your feedback and any interesting pointers from your personal design experience.

Author Bio

Vladimir Roubtsov has programmed in a variety of languages for more than 13 years, including Java since 1995. Currently, he develops enterprise software as a senior engineer for Trilogy in Austin, Texas.

歡迎來訪！^.^!
本BLOG僅用于個人學習交流!
目的在于記錄個人成長.
所有文字均屬于個人理解.
如有錯誤，望多多指教！不勝感激！