基于vlan的HSRP配置

（轉載請注明來源和作者）

SW1
int port-channel 1
switchport mode trunk //*兩個交換機使用二層etherchannel相連

int f0/1 //*作etherchannel的口
switchport mode trunk
channel-group 1 mode on 

int f0/2
switchport mode trunk
channel-group 1 mode on

interface Vlan100
ip address 192.168.0.10 255.255.255.0
standby 1 ip 192.168.0.1
standby 1 priority 150  //hrsp 默認優先級是100  這里設置優先級為150
standby 1 preempt

interface Vlan200
ip address 192.168.1.10 255.255.255.0
standby 2 ip 192.168.1.1
standby 2 preempt     

//*HSRP部分

SW2

interface Port-channel1
switchport mode trunk

int F0/1
switchport mode trunk
channel-group 1 mode on

int F0/2
switchport mode trunk
channel-group 1 mode on

interface Vlan100
ip address 192.168.0.20 255.255.255.0
standby 1 ip 192.168.0.1
standby 1 preempt

interface Vlan200
ip address 192.168.1.20 255.255.255.0
standby 2 ip 192.168.1.1
standby 2 priority 150
standby 2 preempt

posted on 2011-02-16 09:41 prince 閱讀(586) 評論(0)  編輯  收藏 所屬分類: 硬件網絡