藍色雨

在IBM上查到：

DB2 v8.1由于java虛擬機版本不被支持，所以安裝使用db2setup無法安裝。翻譯并記錄下來

Red Hat Enterprise Linux好像支持jvm 在1.4.1以上，因此需要替換v8.1安裝介質中的jvm.建議：IBM version of the Java SDK 1.4.1(我使用的是Sun SDK 1.4.2_04分為兩個步驟：1. java SDK 安裝。2. DB2安裝)

java SDK

1. 下載SDK (sun,ibm都有，具體網址忘了，以后再補吧）
2. 安裝SDK rpm -ivh j2sdk-1_4_2_04-linux-i586-rpm (我下的是：j2sdk-1_4_2_04-linux-i586-rpm.bin 在linux下拷貝到本機，運行：./j2sdk-1_4_2_04-linux-i586-rpm.bin。然后rpm安裝即可)
3. 修改/etc/profile文件,配置java路徑(包括JAVA_HOME、CLASSPATH、path）注意大小寫。

DB2

1. copy 介質到硬盤上，主要目的是可以修改自帶的jvm (如: cp -R /media/cdrom/* <temporary_directory>)
2. 刪除 db2/linux/java 的目錄 (如: rm -Rf <temporary_directory>/db2/linux/java)
3. 創建“java”link指到Java1.4.1的目錄 (如.: ln -s /opt/IBMJava2-141 /<temporary_directory>/db2/linux/java)
4. 安裝了... (e.g.: <temporary_directory>/db2setup)

IBM原文：（http://www-306.ibm.com/software/data/db2/linux/validate/rhel3faq.html）

Yes, there is a workaround. However it is not officially supported by IBM and is therefore provided for informational purposes only. You could use IBM's version of the Java 1.4.1 environment instead of 1.3.1 that is shipped with the DB2 install image. Note that IBM does not support either 1.3.1 or 1.4.1 (SR1) on RHEL 3 yet. To use this unsupported workaround, you first need to install the IBM version of the Java SDK 1.4.1. Depending on which version of the DB2 install image/CD you have, perform the following steps.

If you have a DB2 UDB V8.1 GA (or level prior to 8.1.4) install image/CD:

1. Copy its contents to the hard disk (e.g.: cp -R /media/cdrom/* <temporary_directory>) where the <temporary_directory> is large enough to hold the install image.
2. Delete the db2/linux/java sub-directory.
   (e.g.: rm -Rf <temporary_directory>/db2/linux/java)
3. Create a symbolic link called java to point to the Java 1.4.1 directory.
   (e.g.: ln -s /opt/IBMJava2-141 /<temporary_directory>/db2/linux/java)
4. Ensure the DISPLAY is exported properly and launch the installer.
   (e.g.: <temporary_directory>/db2setup)

If you have DB2 install image / CD refreshed at Version 8.1.4 or later:

1. Set the following environment variables: export DB2USELOCALJRE=TRUE
   export JAVA_HOME=<path to 1.4.1 JVM>
   (e.g.: export JAVA_HOME=/opt/IBMJava2-141)
2. Launch db2setup from the same shell

一個以禮貌自居，善于學習的民族現在最需要的是：學習歷史，勇于道歉。

    擁有多少開始就擁有多少的結束，說起來好似很是悲哀，其實不完全是現在的心情，僅僅因為老是有始無終的做事，希望有所改變吧。
建立Blog其實目的很簡單，太多的文檔要看要記，倒不是有什么東西要發布。想來，Blog多少也可以使用拿來主義，用來統計資料倒也不錯。赫赫