上一篇轉載的文章中涉及到了如何用C來作回調函數讀取或寫入SQLITE數據庫的問題，但其中沒有關于回調函數如何作參數傳遞的問題，比如想要在你的主調函數中獲取該變量，就需要通過調用sqlite3_exec函數給回調函數傳遞結構體指針，下面我作了一例：
????
#include <stdio.h>
#include <stdlib.h>
#include <sqlite3.h>
struct olt_info
{
??? int olt_index;
??? int onu_on_line;
??? int ui_port1;
??? int ui_port2;
??? int ui_port3;
??? int ui_port4;
};
int my_callback(void * olt_temp, int argc, char * value[], char * name[])
{
??? int i;
??? struct olt_info * pdata = NULL;
??? pdata = (struct olt_info *)olt_temp;
???
??? puts("Here below is the code line:\n");
??? for (i = 0; i < argc; i++)
??? {
??????? printf("%s == %s\n", name[i], value[i]);
??? }
??? puts("Code line over.\n");
???
??? pdata->olt_index = (int)atoi(value[0]);
??? pdata->onu_on_line = (int)atoi(value[1]);
??? pdata->ui_port1 = (int)atoi(value[2]);
??? pdata->ui_port2 = (int)atoi(value[3]);
??? pdata->ui_port3 = (int)atoi(value[4]);
??? pdata->ui_port4 = (int)atoi(value[5]);
???
??? return 0;
}
int main(int argc, char * argv[])
{
??? sqlite3 * olt_db = NULL;
??? int rc = 0;
??? int i;
??? char * err_msg = NULL;
??? char temp_msg[150];
??? struct olt_info * olt_temp= (struct olt_info *)malloc(sizeof(struct olt_info));???
???
??? rc = sqlite3_open("olt.db", &olt_db);
??? if (rc)
??? {
??????? fprintf(stderr, "Open database error, %s\n", sqlite3_errmsg(olt_db));
??????? exit(1);
??? }
??? else
??? {
??????? fprintf(stdout, "Open database OK.\n");
??? }
??? rc = sqlite3_exec(olt_db, "create table olt_tbl(olt_index integer primary key autoincrement, onu_on_line smallint, ui_port1 smallint, ui_port2 smallint, ui_port3 smallint, ui_port4 smallint);", NULL, NULL, &err_msg);
??? if (rc != SQLITE_OK)
??? {
??????? fprintf(stderr, "Create table error, %s\n", err_msg);
??????? exit(1);
??? }
??? else
??? {
??????? fprintf(stdout, "Create table OK.\n");
??? }
??? for (i = 0; i < 6; i++)
??? {
??????? sprintf(temp_msg, "insert into olt_tbl(onu_on_line, ui_port1, ui_port2, ui_port3, ui_port4) values(%d, %d, %d, %d, %d)", i * 16, i, i, i, i);
??????? //rc = sqlite3_exec(olt_db, "insert into olt_tbl(onu_on_line, ui_port1, ui_port2, ui_port3, ui_port4) values(32, 1, 1, 1, 1);", NULL, NULL, &err_msg);
??????? rc = sqlite3_exec(olt_db, temp_msg, NULL, NULL, &err_msg);
??? }
??? if (rc != SQLITE_OK)
??? {
??????? fprintf(stderr, "Insert items failure, %s\n", err_msg);
??? }
??? else
??? {
??????? fprintf(stdout, "Insert items OK.\n");
??? }
??? rc = sqlite3_exec(olt_db, "select * from olt_tbl where olt_index==4;", my_callback, olt_temp, &err_msg);
??? if (rc != SQLITE_OK)
??? {
??????? fprintf(stderr, "Selete from olt_tbl failure, %s\n", err_msg);
??????? exit(1);
??? }
??? else
??? {
??????? fprintf(stdout, "Excute sql OK.\n");
??? }
???? printf("%d-%d-%d-%d-%d-%d\n", olt_temp->olt_index, olt_temp->onu_on_line,olt_temp->ui_port1,olt_temp->ui_port2,olt_temp->ui_port3,olt_temp->ui_port4);
??? free(olt_temp);
??? sqlite3_close(olt_db);
??? return 0;
}
其中my_callback(void * pdata, int argc, char * value[], char *name[])為回調函數，切記回調函數只能按照這種格式來定義參數，
??? 第一個參數為你的主調函數傳遞過來的指針，
??? 第二個參數為變量的個數，
??? 第三個為變量的值，
??? 第四個為變量的名稱，
??? 有兩個問題需要注意：
??????? 一、這里面參數都是字符串類型，根據您的需要作出強制類型轉換即可。
??????? 二、第一個參數為void *類型，需要在你的回調函數里強制轉換成需要的類型。
?
Trackback: http://tb.blog.csdn.net/TrackBack.aspx?PostId=1914908
?